Worsdale Electrical Contractors, NAPIT registered electrician in North Yorkshire

The distribution board

What we cover.

Whether it is one dead socket or a full farm supply, it is the same standard of work and the same paperwork at the end of it.

Main switch, Worsdale Electrical Contractors Hunton, North Yorkshire

Way 01

Rewires & consumer units

Full and partial rewires, and consumer unit replacements to current 18th Edition (BS 7671) standards.

Rewires and fuse boards

Way 02

EICRs & Minor Works

Electrical Installation Condition Reports for homeowners and landlords, plus Minor Works certification.

EICRs and certificates

Way 03

EV charger installation

Home and workplace charge points, supplied and fitted. Standard home install £1,400 inc VAT, Hypervolt with its 7.5m tethered lead, DNO notification handled for you.

See the charger page

Way 04

Fault finding & repairs

Tripping circuits, dead sockets, intermittent faults. Diagnosed and fixed, not guessed at.

Fault finding

Way 05

Commercial work

Installations and maintenance for shops, offices and small commercial units.

Commercial work

Way 06

New builds & extensions

First and second fix electrics for extensions, renovations and new build properties.

New builds

Way 07

Agricultural work

Farm and barn wiring, outbuildings, three phase supplies, livestock building electrics and general farm maintenance.

Outdoor & garden electrics

Outside lighting, garage and outbuilding supplies, garden offices, hot tubs and security lighting. Armoured cable run properly and buried to depth.

Outdoor electrics

Spare way

Something not listed

There is always a spare way on the board. If what you need is not on this list, ring and ask, and I will tell you straight whether it is a job for me.

Call 07546 173885

Every job: a look at what is actually there, a clear quote before work starts, and proper certification once it is finished.

Electric vehicles

Home EV chargers, priced before anyone parks on your drive.

The charger is the easy part. What people worry about is not knowing who is turning up, or a second, bigger number appearing once the van is on the drive. So the fuse board gets looked at first, and then you get the figure.

£1,400 inc VAT, standard home install. EV distribution board, the Hypervolt with its 7.5m tethered lead, and 10m of supply cable from your board out to it.

Three chargers to pick from: Hypervolt, Zappi or Andersen
DNO notification handled for you
NAPIT certificate handed over on completion
Workplace and multi unit installs priced separately

See the charger page Get booked in

Close view of a wall-mounted home EV charger with the charging cable coiled and the connector holstered, cable clipped neatly down the brickwork. — Cable coiled, connector holstered, clips in line

A three phase distribution board in a farm building: Schneider KQ Loadcentre on a backboard with a three phase meter above, six red three phase sockets, two blue 16A single phase sockets and two twin 13A sockets, each with its own isolator. — Three phase board and socket outlets, farm store

Agricultural

Farm and barn electrics.

This is farming country, and a farm is a different job to a house. Long runs, three phase, dust, water, livestock, and machinery that has to keep running. It is work I have been doing for years, and it is not something every domestic electrician will take on.

The board in that photo is the kind of thing I mean. Three phase distribution feeding red three phase sockets for the big machinery, blue 16A singles, and ordinary 13A twins for everything else, each on its own isolator so one thing can be shut off without stopping the building.

Three phase supplies, distribution boards and sub mains
Three phase and single phase socket outlets, isolators and switchgear
Farm and barn wiring, first and second fix
Livestock building electrics, lighting and power
Outbuildings, workshops, grain and machinery stores
General farm electrical maintenance and fault finding

Call about a farm job

Tell me what the building is used for and what is going in it, and I will come and look.

About

Worsdale Electrical Contractors.

Run by Jake Clark-Worsdale, based in Hunton, North Yorkshire. Twelve years as an electrician, six of them self employed, covering rewires, consumer units, EICRs, new builds, commercial work and farm electrics across a wide rural patch.

Every job is carried out to current wiring regulations, with clear quotes before work starts and proper certification once it is finished. As the business has grown, work is also carried out alongside trusted subcontractors. Every job is still overseen directly, with the same standard of paperwork and finish whoever is on the tools.

Word gets round fast out here, which is exactly why the price you are given is the price you pay. Done properly, first time.

Registered bodyNAPIT

Membership no.67727

Trading asWorsdale Electrical Contractors

BasedHunton, North Yorkshire

CoverageWider North Yorkshire

The Worsdale Electrical van parked on a driveway beside a brick house, with a wall-mounted charge point fitted next to the meter boxes. — That is the van, and that is the job

How it works

How a job runs, start to finish.

Four stages, whether it is a dead socket or a full rewire. You always know which one you are in.

1Call or messageTell me what is going on. Plain answers on the phone, no jargon, and I will say straight away if it is a job for me.

2Come and lookA proper look at what is actually there, rather than a guess down the phone.

3Clear quoteThe full figure before anything gets booked in. If something changes, you hear about it before it happens, not after.

4Done properlyWork carried out to 18th Edition, certification handed over, and the place left tidy.

Get booked in 07546 173885. Back to you within 24 hours, Monday to Friday.

Coverage

Working across North Yorkshire.

Home base is Hunton, between Bedale and Leyburn. From there it is Swaledale and Wensleydale in one direction, York and Harrogate in the other.

HuntonHome base RichmondAnd surrounding villages ReethSwaledale HawesUpper Wensleydale LeyburnWensleydale Catterick& Catterick Garrison Bedale& surrounding area Northallerton& surrounding area DarlingtonBorder area Harrogate& surrounding area York& surrounding area MiddlesbroughOn request

Somewhere not on the list? Ask. If it is a job worth travelling for I will tell you, and if it is not, I will tell you that too.

Reviews

The honest track record.

Reviews on here are still coming. Rather than dress the page up with nothing behind it, here is only what I can stand behind today.

12Years working as an electrician

6Years running Worsdale Electrical

67727NAPIT membership number, check it yourself

If you want to speak to someone whose work I have done before you commit to anything, ask me on the call and I will sort it.

View Google reviews View Facebook reviews

Questions

The things people ring up and ask.

Straight answers, same as you would get on the phone.

Which areas do you cover?

Home base is Hunton, between Bedale and Leyburn. From there it is Richmond, Catterick and Catterick Garrison, Reeth and Swaledale, Hawes and Upper Wensleydale, Leyburn and Wensleydale, Bedale, Northallerton, Darlington, Harrogate and York. Middlesbrough on request. If you are somewhere not on that list, ring and ask.

Are you registered?

Yes. Worsdale Electrical Contractors is NAPIT registered, membership number 67727, and you are welcome to check it. All work is carried out to current wiring regulations, 18th Edition, BS 7671, with proper certification handed over when the job is finished.

How much does it cost to have an EV charger fitted?

£1,400 inclusive of VAT for a standard home install. That covers the EV distribution board, the charger, 10m of supply cable from your board out to the charger, the NAPIT certificate and the DNO notification. If the run is longer or the routing is awkward the price changes, and you get that figure in writing before anything starts.

Will my fuse board need changing for an EV charger?

Sometimes, and that is exactly why the board gets looked at before a price is given rather than after. A consumer unit change is about £1,000 inclusive of VAT on its own. Done in the same visit as the charger, the pair comes to £2,000 rather than the £2,400 they cost separately.

Do you do three phase and farm work?

Yes. Three phase supplies, distribution boards and sub mains, three phase and single phase socket outlets, isolators and switchgear, farm and barn wiring, livestock building electrics, outbuildings, workshops, and grain and machinery stores.

What is an EICR and do you do them?

An Electrical Installation Condition Report is an inspection and test of the electrical installation in a property, written up into a report telling you what condition it is in and what needs attention. Worsdale Electrical carries them out for homeowners and landlords, along with Minor Works certificates for smaller jobs.

Do I get a price before the work starts?

Always. Someone comes and looks at what is actually there rather than guessing down the phone, then you get a clear quote before anything is booked in. If something changes you hear about it before it happens, not after.

How quickly will you get back to me?

Within 24 hours, Monday to Friday. Ring 07546 173885, email info@worsdaleelectrical.co.uk, or send a WhatsApp message to the same number.

Electrical work done properly, first time.

What we cover.

Rewires & consumer units

EICRs & Minor Works

EV charger installation

Fault finding & repairs

Commercial work

New builds & extensions

Agricultural work

Outdoor & garden electrics

Something not listed

Home EV chargers, priced before anyone parks on your drive.

Farm and barn electrics.

Worsdale Electrical Contractors.

How a job runs, start to finish.

Working across North Yorkshire.

The honest track record.

The things people ring up and ask.

Call, email, or send a message.