Call 07546 173885
  1. Home
  2. Advice
  3. Why a fuse box keeps tripping
Advice

Why does my fuse box keep tripping?

A tripping switch is your fuse board doing its job. It has spotted something it doesn't like and switched the circuit off before it could cause harm. The aim is to find out what, not to keep resetting it.

NAPIT registered, no. 67727Which? Trusted TraderBased in Hunton
NAPITRegistered, no. 67727
18th EditionBS 7671 wiring regulations
12 yearsIn the trade, six self employed
Fixed quotesPriced before work starts

What the switches on your fuse board do

What could be causing it

There isn't just one cause, but a faulty appliance is a common one. These are the things to rule out.

  1. A faulty appliance. Kettles, toasters, washing machines, tumble dryers, ovens, immersion heaters and hot tubs are all worth checking.
  2. Too much on one circuit. Several heaters or a kettle plus a toaster plus an air fryer on the same ring can trip a switch.
  3. Moisture. Outdoor sockets and lights, garages, sheds, outbuildings and damp walls. If it only trips when it rains, start here.
  4. Damaged or worn wiring. A nail through a cable, rodents, an old accessory or a loose connection.
  5. An ageing RCD or board. Sometimes the device itself is worn, but check everything else first.

What you can safely check

  1. Note which switch has tripped, and what was on at the time.
  2. Switch off or unplug everything on that circuit.
  3. Reset the switch (push it fully down, then up).
  4. Plug things back in one at a time. If it trips when you plug in a particular appliance, you've found the fault. Leave that appliance out and get it repaired or replaced.
  5. If it trips with nothing plugged in, or you can't find a cause, leave the switch off and call an electrician. There's a fault in the wiring.

Don't

Ring us straight away if there's

If there's a fire or someone's hurt, get out and call 999.

"My fuse box is old. Do I need a new one?"

Not necessarily, and we won't scare you into it. Boards fitted today include RCD protection. Many older ones don't. An electrical inspection (an EICR) tests the whole installation and tells you what you've actually got and whether anything needs doing. Some old boards are perfectly sound. Some need replacing. We'll tell you straight which yours is. More on fuse board upgrades and on fault finding.

What an electrician does when your switch keeps tripping

We test each circuit to find the one with the fault, then trace it: an appliance, an accessory, a connection or the cable itself. Then we fix it, and tell you what it was, so you can see what you're paying for.

We're based in Hunton. We cover Northallerton, Thirsk, Ripon, Bedale, Leyburn, Richmond, Catterick and the Dales, out to Harrogate and York. NAPIT registered (no. 67727) and a Which? Trusted Trader. Call or WhatsApp 07546 173885. We reply the same working day, Monday to Friday, and give you a clear price before any work starts.

More advice
Questions

Quick answers.

Is it safe to keep resetting a tripping switch?

Once is fine. If it trips again straight away, stop and call someone.

Why does my RCD trip for no reason?

There's nearly always a reason: a faulty appliance, moisture or a wiring fault. An electrician can test to find it.

Will an inspection find the problem?

An inspection looks at the whole installation. If you already have a tripping circuit, tell us. We'll find that first.

Get in touch

Call, email, or send a message.

Tell me roughly where you are and what needs doing. I come back to you the same working day, Monday to Friday.